Power Supplies For Network Switches

C40K150200 15V@2A

SPECIFICATION

INPUT CHARACTERISTIC

OPERATING INPUT RANGE
140VAC - 300VAC.
INPUT FREQUENCY
50Hz
INPUT CURRENT
< 600mA rms @ 140VAC
EFFICIENCY
> 75% under maximum load @ 230VAC.
INRUSH CURRENT
>< 30A Peak @ 230VAC Cold start at 25 Deg.
NO LOAD POWER
< 0.5W at 230VAC input.

OUTPUT CHARACTERISTIC:

OUTPUT VOLTAGE
15.0 VDC
OUTPUT CURRENT
2.0A
LINE & LOAD REGULATION
< +/- 5%
RIPPLE
< 150mV
NOISE
< 300mV (measured with 0.1µF ceramic disc & 10µF Electrolytic capacitor across output)
OUTPUT OVER CURRENT
< 3.5A Max @ 230VC
HOLD UP TIME
> 5 mSec at Full load 100VAC input.
> 20mSec at Full load 230VAC input
TURN-ON DELAY
< 1.0 Sec.
RISE TIME
< 20 mSec

PROTECTIONS:

OUTPUT OVER LOAD AND SHORT CKT PROTECTION
Available

ENVIRONMENT

TEMPERATURE
Operation Ambient 0ºC to +45ºC
Storage -15ºC to +70ºC ambient.
HUMIDITY
Operating 10% RH to 95% RH non-condensing.
Storage 10% RH to 95% RH non-condensing.

PRODUCT SAFETY:

DI-ELECTRIC VOLTAGE WITHSTAND TEST
3.0KVAC rms, 50Hz INPUT and Shorted OUTPUT Terminals.
INSULATION RESISTANCE
When tested with a 500VDC Megger, I.R should be > 100 M Ohms Between Shorted INPUT and Shorted OUTPUT Terminals.
EARTH GROUND RESISTANCE
The leakage current shall be < 0.25mA for Class II equipment when the power supply is operated at 300VAC input volatge.

RELIABILITY & QUALITY

COMPONENT DERATING FACTORS
All semiconductors junction temperature shall not exceeded the manufacturer's maximum thermal rating.

EMI / EMC

SURGE IMMUNITY
As per Test standard IEC61000 - 4 - 5
Test Level 3: +/- 2KV in Differential Mode1
ELECTRICAL FASTTRANSIENTS
As per Test standard IEC61000 - 4 - 4
Test Level 3: 2KV
ESD
As per Test standard IEC61000 - 4 - 2
Test Level 2: Air discharge : 6KV
Test Level 2: Contact Discharge : 4KV

TERMINATIONS:

AC Input
AC input through 3-Pin intigrated Indian standard Plug PlasticMoulded Earth Pin.
DC Output
DC Cable 17 Strands/38Swg Gauge wire of 1.5 Mtrs. Length. with 2.5X5.5mm L-Type Locking pin Connector.

INDICATIONS

RED LED Provided to Indicate Adaptor O/P ON

ENCLOSURE

DIMENSIONS
L = 95.2 mm. W = 52.2 mm. H = 49.7 mm
MATERIAL
ABS JET Black Plastic.
AC PIN MATERIAL
L & N Brass with Nickel plated. E - Plastic moulded earth Pin.
WEIGHT
150Grams under packed condition